fireflies

[akinlolu olugboji]

Why the fireflies.

Interior lighting scheme

30 lights 25W all spootlights

packet tracer 20 passes

[Jorge Javier Lara Domínguez]

Akin, aun le falta procesar la imagen, aligualñ qeu sucede con el ruido va desapareciendo conforme va afinandose la iluminacion en un proceso mas largo. Saludos

[Roy Hirshkowitz]

Use the glossy switch on the columns and mullions -- OR -- use the Path Tracer.

[akinlolu olugboji]

Thanks. The glossy switch works like a dream.

Time will not permit Path Tracer. Any development on the cloud rendering yet?

[Alejandro Testa]

The glossy switch is for each material no? It is located in material edit  shader glossy? Or I  am missing something else.  Thanks in advance,

Alejandro

[Roy Hirshkowitz]

For each material, yes.

[akinlolu olugboji]

In my case only for the glossy ones, but have to switch the floor tiles off.

[Jan Verzelen]

besides the fireflies there is something wrong with the lighting. Lots of strange spots. Did you check your units? I wonder if that could be the reason for the fireflies also.

 

[akinlolu olugboji]

This is what I was trying to replicate.

[Roy Hirshkowitz]

Jan's right, though-- there's very likely a scale problem in your drawing which would account for the bright spots when the wall or steps meet the floor.

[akinlolu olugboji]

Am am sure of the units, as the rpc confirmed. The lights are sphere of glass material made to glow. 

[Roy Hirshkowitz]

It's the lights on the floor I'm talking about.  Those are almost always a symptom of incorrect units.  Send the drawing if you need to.

[akinlolu olugboji]

To think I have always thought the lights on the floor where the glare from the spot lights above. File uploaded to you as fireflies.zip.