AccuRender nXt

advanced rendering for AutoCAD

We will place information about new builds in the thread.

If you want to be informed whenever a new build is available, subscribe to this thread by clicking "follow" below the thread.

Views: 1413

Replies are closed for this discussion.

Replies to This Discussion

Build 324 is ready to download from: Downloads

This build will not work with old McNeel nXt Licenses, only with nXtRender licences. See Renewals if you need to renew your license.

This build has names for Lighting Channels and will work properly with Layer Material Schemes.

To use layer Material Schemes, install build 324 and then install the nXtRender Batch Add-on from the Downloads Page

Forum post about Layer Material Schemes:

LAYER MATERIAL SCHEMES

Ich habe mir auch die neue Build 324 herunter geladen und installiert. Sieht gut aus, aber wann werden die weissen Flecken und Pixel verschwinden??

Das nächste ist die Frage, ob man die Rendergeschwindigkeit mal erhöhen könnte? Da ich sehr viel mit grossen 3D Modellen ( 60 - 150 MB Grösse) arbeite, dauert das dann immer ein wenig.

Alfons

Sorry, but where in 324 is the new "Layer Material Schemes" to find ?

Or do I have to install the 30-day-trail-version from this first ?

Greets from maximoto in Germany

Oops - I thought the Layer Materials Schemes were include in this new version 324. They are not included in the install, but need to be installed separately.

To use layer Material Schemes, install build 324 and then install the nXtRender Batch Add-on from the Downloads Page

Forum post about Layer Material Schemes: LAYER MATERIAL SCHEMES

Ok, up and running.

and OK from here.

Thanks a lot !

Let us know if you get Layer Material Schemes to work. We are looking for feedback on how to improve it.

Hi, I downloaded and isntalled  build 324  and the layer material schemes, the layer material schemes works,  it seems as it will hang up but at the end it works, but I have trouble renaming the lighting channels, I change the name but it seems there is some problem, because after that it still appera 1, 2,3 etc...

Hmmm... seems to work here.  Give me the exact steps required to produce the channel name problem and I'll take a look.

Die nxt_Layer_ Materials funktionieren gut, aber wofür brauche ich das?

Die Materialien werden ja auch unter NXT Materialien angezeigt.

Oder habe ich da etwas nicht verstanden??

Alfons

Sie durfen Materialen fur einem "Drawing" specifieren und sparen.

Spater Sie konnen die Materialen fur einem anderen Drawing benutzen, or fur die selben Drawing wiederverwendung, nach Sie neuen Materialien benutzen hatten.

Hi Roy, I  create three lights channels,  I assigned a light to light channel 2, I tag the light then I use the right mouse button to  allow properties, then in light properties I change the light channel name to the new name, press ok, when I open the light again, (reproduce the same steps),  it appears agains as light channel 2.

RSS

Search

Translate

Latest Activity

Brittany Watson replied to Brittany Watson's discussion Groundcover Issues
"Hi Ben, You were absolutely right! I took over a computer that was previously used for rendering by someone else. The Accurender Plant Editor was on the desktop and used as the primary plant editor, so I assumed it was the only one. Thank you so…"
May 18
Ben Mixson replied to Brittany Watson's discussion Groundcover Issues
"Hi Brittany, I have two different plant editors. The Accurender plant editor that installed with Accurender Studio and the NXT plant editor that installed with NXT for Autocad. Only the NXT for Autocad version lets you open, modify, and save…"
May 14
Brittany Watson posted a discussion

Groundcover Issues

Hello,I am hoping to get some clarity on how to modify and add groundcover. I have searched everywhere on the forum and online to find how to save a plant as .ArGroundcover, but I cannot find anything. I am using AccuRender Plant Editor and once I finish editing the plant that I want to use as a groundcover, I click "save plant as", but all it allows me to save as is .ArTree. I have a deadline to get this render finished, but I cannot for the life of me figure this out. See More
May 14
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Thanks, I'll check on the first two.  The third is normal behavior-- data conversion stops when the arstudio data is detected.  There is a command to remove the arstudio data which would allow you to start from scratch-- probably not…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Two things don't seem to translate from nXt: Procedural bump and orientation of texture in a material.   Also, if a decal is changed using nXt, Studio continues to display the original decal. Editing the decal in the Studio material pallet…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"That sorted it - using the Studio camera and then selecting "Get AutoCAD view"."
Apr 19
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Interesting.  ArStudio has its own WalkAbout-like feture, it's the little camera button.  If you do it while the preview is running you should see the view changes automatically in the rendering."
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"I'm having trouble getting the desired view in Studio. I've tried setting the view in nXt walkabout and then using that to set the AutoCAD view. However, when I render from Studio, it gives me something different (see images below)."
Apr 19

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service