AccuRender nXt

advanced rendering for AutoCAD

If I start a new drawing in AutoCAD 2018, load nXt and then press the Walkabout button, AutoCAD crashes instantly.

However, this doesn't happen if I start with a template, or open an old drawing originally created in AutoCAD 2011.

Views: 45

Reply to This

Replies to This Discussion

I've narrowed the problem down.

It has nothing to do with AutoCAD 2011. The problem is the initial plan view when starting a blank new drawing.

If I rotate the AutoCAD view before pressing the Walkabout button, then everything works fine.

After that there is no problem reverting back to plan view.

I can duplicate this.

I can also duplicate it in AutoCAD 2015, 2016 and 2017.

I'll see if I there is a way to we can detect and fix this.

Thanks.

RSS

Search

Translate

Latest Activity

mike makki commented on Ljiljana Jankovic's photo
Thumbnail

kuhinja

"nice render for Nxt.."
yesterday
Valeria replied to Valeria's discussion Combining daylighting and artificial lighting for an exterior rendering
"thank you so much!!"
Monday
Roy Hirshkowitz replied to Valeria's discussion Combining daylighting and artificial lighting for an exterior rendering
"Post an example image of what you're getting.  It will be easier to evaluate."
Monday
Ljiljana Jankovic commented on Ljiljana Jankovic's photo
Thumbnail

kuhinja

"Thank you!"
Monday
Ljiljana Jankovic commented on Ljiljana Jankovic's photo
Monday
Ljiljana Jankovic commented on Ljiljana Jankovic's photo
Monday
Rich Hart replied to Sampdoria's discussion License Problem
"No, the old build only work with AutoCAD versions through 2013."
Saturday
mike makki replied to Sampdoria's discussion License Problem
"hi rich does the old build version works with 2017 autocad? thanks"
Saturday

© 2018   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service