AccuRender nXt

advanced rendering for AutoCAD

 

I have a problem with the set up off Accrender from my CD-rom. In the past I had Windows in a 32-bit version on my computer now I have a 64-bit version of it and also of AutoCAD 2012.

How can resolve the problem. See also attached file

 

Views: 113

Attachments:

Reply to This

Replies to This Discussion

You can't.  AccuRender 4 is 32 bit only.  You'll need to try nXt which has both 32 and 64 bit versions.
Still go on right away and install only you will earlier versions of AutoCad too I believe up to 2008 for it to work, but the stability cannot be guarantee. So you still need to go the way of Roy's advise and move up to AR5.
I've been able to install Accurender nXt. But it's very different from Accurender 4. Does someone has a user manual?

You can find all the help you need on this site.

Click on Support - Help and tutorials to get you started. Then use this forum for any specific questions or advice.

Once you get the hang of nXt, you won't be going back to AR4 as the results are much better and the setting up is far simpler.

Here is a good place to go also the webminar on getting started with Nxt is there also.

RSS

Search

Translate

Latest Activity

Dizzy Gosnell posted a photo

AC/DC Hells Bell

This is a model I made of the real bell made for AC/DC by Taylors of Loughborough in England, one of the last actual bell foundries. It weighs just above a ton and a quarter. and has been used on every tour since it was cast.
14 hours ago
Alfons Akamp replied to Alfons Akamp's discussion Flecken in Bilder
"Richtig, darum rendere ich im Standard Modus. Right, that's why I render in standard mode."
Friday
David Richards replied to Alfons Akamp's discussion Flecken in Bilder
"As you point out, it's not practical to render 250-300 frames for an animation in Hybrid Mode.  Packet Mode is  the most efficient way do this with our software."
Sep 22
Alfons Akamp replied to Alfons Akamp's discussion Flecken in Bilder
"Hallo David Das mag alles richtig sein, was Sie sagen. Für Einzelbilder ist es auch kein Problem da mal eben über Nacht 800 oder 1000 oder 1500 Passes zu machen. Aber was ist, wenn man eine Animation mit 250 - 300 Bilder rendert? Wenn…"
Sep 21
David Richards replied to Alfons Akamp's discussion Flecken in Bilder
"This page on our site provides some insight into the performance of the different engines http://www.renderplus.com/wp2/wk/NXtRender_Rendering_Engines.htm#Hybrid_Engine_4"
Sep 18
Alfons Akamp posted a discussion

Flecken in Bilder

Ich habe da mal eine Frage:Wenn ich Bilder im Standard Modus rendere, sehen diese sehr gut aus.Wenn ich das gleiche Bild im Hybrid Modus rendere, habe ich jede Menge kleine weisse Punkte und Flecken in dem Bild.Warum und wieso kommen diese Flecken????I've got a question:When I render images in standard mode, they look very good.When I render the same image in hybrid mode, I have tons of tiny white spots and spots in the image.Why and why do these spots appear ????See More
Sep 5
Dizzy Gosnell posted photos
Aug 12
George Ioannidis posted discussions
Aug 10

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service