AccuRender nXt

advanced rendering for AutoCAD

Hi Rich and Roy, I think i will need to format my hard disk from my PC, When I reinstall NXt how I do to use my license? I d'ont want to use my seond license numbre bcase i will install this license later on my laptop. Thanks in addvance.   Alejandro

Views: 72

Reply to This

Replies to This Discussion

Is it a (new) Render Plus licenses or a legacy McNeel license?

Hi Roy, is a  render Plus license

Thanks-- I'll get Rich to chime in here.

If you are renaming your computer when you format the drive, use the Replace Unused Computer on the RPS License dialog to remove the old computer name from our database and authorize nXtRender with the new computer name.

Otherwise, just open the RPS License dialog and enter your license number and click on Check License and Validate.

If you have any problem, use the "Report Problem..." button to send us an email to make the switch here, and send you a new authcode.

Thanks Rich.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Peter Milner's discussion Latest Render Farm update
"Just installed the thing on a Microsoft Surface Pro without much on it-- getting the same side x side error with the Farm Monitor so I probably don't need you to run depends on that one.  My farmer (nxtfarmer64.exe and nxt64.exe) does…"
Monday
Roy Hirshkowitz replied to Peter Milner's discussion Latest Render Farm update
"Thanks-- in the meantime I'm going to try installing the thing on a machine here-- then I'll have Scott at McNeel install onto a clean machine over there."
Monday
Peter Milner replied to Peter Milner's discussion Latest Render Farm update
"Not a problem.  I'll do it tomorrow as I have a stack of renderings running at the moment."
Monday
Roy Hirshkowitz replied to Peter Milner's discussion Latest Render Farm update
"If you get a chance-- but I'm 99% sure it will run on the main machine.   Something is missing from the installer that is present on your main machine.  The reason it's on the main machine is very likely due to other software…"
Monday
Peter Milner replied to Peter Milner's discussion Latest Render Farm update
"Spot on. The old and new farm monitors both work on my main machine. I'm not sure if the new farmer does though. If you like, I can test it. "
Monday
Roy Hirshkowitz replied to Peter Milner's discussion Latest Render Farm update
"That's wise-- so if I'm understanding things-- The Farm Monitor, whether old or new, does not run on the node you tried. The new Farmer does not run on node, the old one does. The old Farm Monitor runs on your main machine. Is this…"
Monday
Peter Milner replied to Peter Milner's discussion Latest Render Farm update
"I was going to, but when I found it didn't launch on the first one, I stopped there."
Monday
Roy Hirshkowitz replied to Peter Milner's discussion Latest Render Farm update
"I may need your help to debug this one-- a quick look at the installer doesn't show any problems.  I'll investigate a bit more this morning. You did actually run the installer on all of the machines, right?"
Monday

© 2014   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service