AccuRender nXt

advanced rendering for AutoCAD

We've just added a couple of powerful servers onto our render farm, but they are only running steadily at 40% capacity.

Both machines are running on Windows 2012 Server. Would this make any difference?

They both have quad 10 core processors and all seem to be running.

In comparison, the dedicated render farm bounces up and down between 50% and 80% as it runs through a render (running on Windows 7 Pro).

Views: 344

Reply to This

Replies to This Discussion

I'll need to check-- the current product may have some build in limitations or may be subject to some less than ideal scheduling bottlenecks.  You're, of course, a very good candidate for the new stuff-- but there may be ways to make the legacy stuff work better.

I don't know if it's possible to get AutoCAD installed-- if you can you could try to run interactively and see if it makes a difference.  (It probably won't, so I wouldn't spend too much time on it.)

I could send you a file to test with ArStudio-- you could run that interactively and see how that does just for grins.  I have a 16 core box here and the utilization is very high with this product.

My local machine bounces up and down from 29% to 100%.

The main renderfarm actually bounces from 5% to 75% (not sure why I got a different reading yesterday).

I generally render with the Path Tracer engine which has a different pattern of processor usage to the other two engines.

Looks like there's a 32 core hard coded limit in the legacy product.  AccuRender Studio doesn't have this limitation.

So the original render farm having 4 nodes with 20 cores each, doesn't have a problem (although they still only max to 80%). Whereas the new server farm has three machines with 40 cores each and therefore underperforms. Correct?

So, what would be involved in moving across to Accurender Studio?

It's a little hard to say whether the bottleneck is the limit I'm imposing on the number of threads created or something else.

********

AR Studio is not too far from production ready-- but let's test the thing first on your new farm machines. The first test involves making sure that we are indeed getting better performance out of the thing in a 40-core scenario.

***********

I assume you can install and run programs interactively from your main console? 

If so first step is to install ArStudio on a node and I will give you a test file to run interactively so you can measure its performance. 

Download ArStudio setup here.

Test file (which you'll recognize) is here.

Thanks for that Roy.

I'll give it a go tomorrow.

We tried to run nXt Studio on one of the servers, but got this error:

I've managed to run it successfully on one of the dedicated render nodes and it bounces up to 100%.

Can I hook Accurender Studio on my local machine up to the render farm?

I can see how to point it to the shared folder, but that's about it.

Also, how would I export a .arscene file from AutoCAD/Accurender?

The tools are all there, although perhaps in a somewhat primitive state.

In the install folder-- usually c:\program files\accurender studio\:

ArFarmNode.exe runs on the servers in the farm

ArFarmMonitor.exe allows external monitoring and a few actions.

******

This thread has some detailed information about extracting an ArScene file from AutoCAD.  This stuff is all still work in progress but getting closer.

Just FYI, if you decide to go this route a good noise filtering program will be a useful tool.  I like NeatImage but there are others.

I think I've hit a snag.

There's no support for AutoCAD 2011, so I am unable to extract an ArScene file.

Wow 2011! 

It may be possible to do-- it looks like they did have .net support back then.  I'll look into it.

Are you modeling in AutoCAD or with other software?  

All in AutoCAD.

RSS

Search

Translate

Latest Activity

Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin It's work with your .PNG file. Did you just SAVEAS a .JPG to a .PNG with a image editor ? Capture.PNG Render.png"
Dec 24, 2019
mike makki replied to Daniel Hargreaves's discussion Accustudio
"I can help daniel"
Dec 24, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I'm not sure if you are applying the tree to the region as a decal or as part of a material. if a decal onto the region, I don't think AR will allow 2 decals. I guess you could stack them but I don't think one applies to the other…"
Dec 23, 2019
Paul Cloutier posted a discussion

Material help !

Hello...Need help for settings alpha for this tree bitmap.AutoCAD 2018.Thanks !See More
Dec 23, 2019
Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service