AccuRender nXt

advanced rendering for AutoCAD

I use the scroll wheel on my mouse alot in autocad to zoom in and out and atmies to scroll up and down a list in standard windows programs.

Problem is after some time the scrolling become eratic. What could be the cause and also solution to the problem.

Views: 260

Reply to This

Replies to This Discussion

Hello Akinlolu,

The reason is probably dust which has accumulated below the scroll wheel over time.

You can unscrew the mouse remove the wheel and clean it with alcohol or something similar.

Of course getting a new mouse is another option. :P

Will give the cleaning a shot. It being long since I did this typs of cleaning in the days of track ball mouse, the ball was always clean, it the rollers that picks up the dirt from the ball.

A new mouse soon goes to this state of eraticness after a few weeks.

thanks for the tip

Have you installed the proper mouse software (from its manufacturer) or it just uses some generic Windows drivers? Maybe you could start from there, before you disassemble the mouse ;)

It is a generic windows driver. No installation software came with the mouse.
Gotten another one for now so should I pull this apart and cannot put it back together again, I would not be mouseless

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"No license yet. Send some results when you can-- might be easier as a forum post instead of this comment section."
yesterday
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"The drawings are likely scaling correctly-- don't scale the geometry please. These are only display units for the arstudio interface."
yesterday
Maciej commented on Maciej's photo
Thumbnail

c3

"You were right, Roy. It was about the file name - ash on my head. ARStudio seems to be very ok for my humble interiors' purposes. One minor point (see attached) - meters or millimeters only, what about centimeters? I need to scale all my…"
yesterday
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"Yeah, I know, usual situation. :)"
yesterday
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"Looks like there's no file name.  Try saving the drawing to a file first, then run ArStudio.  This is a bug, obviously.  Thanks."
yesterday
Maciej commented on Maciej's photo
Thumbnail

c3

"I followed all the instructions and that is what I see now...Life is a struggle... Is there something I did wrong? AutoCAD 2013, nXt 0358-SG17, Windows 7"
yesterday
Roy Hirshkowitz's discussion was featured

AccuRender Studio

Here's the latest version of the new stuff.  If you're interested, try it at your leisure and let me know what you find.  It's a work in progress, so please be kind.  We'll likely have some bugs and certainly have some missing features.******Some highlights:Standalone renderer which accepts input from Rhino, Sketchup, Obj and FBX.Plugins for AutoCAD and other CAD applications.Online material and plant…See More
yesterday
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"AccuRender Studio is a choice on the download menu above.  There are install links and some instructions.  I'll take a look and make sure everything is up to date."
yesterday

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service