AccuRender nXt

advanced rendering for AutoCAD

Hi guys, I am trying to figure out what cause the strange shadow in this image .The texture is a flat solid colour, the object is a solid. Any thoughts?

Views: 131

Attachments:

Reply to This

Replies to This Discussion

It looks like interference from 2 different objects.
Hi Daniel , I already look at hte model and I can´t find any interference. I will try with Peter option. Thanks to both of you for your comments.

Alejandro
Try setting the object properties to Faceted.

Peter
Hi Peter I am trying with faceted and I have the same result. I will check the model one more time.
Does the next section along have the same problem?
If not, then try copying it.

Peter
The problem is that every section is diferent, each z point has a diferent height.Maybe I can draw a 3d face in the ucs and move 5 mm or so.
Hi, this is the image only with the ceiling. No lights, only studio brightness. Any thoughts?
Attachments:
Can you post the model?

Peter
Sure, The complete model or only the ceiling?
Try just the ceiling first.

Peter
Thanks Peter for all your help. I am posting the ceiling
Attachments:
Peter, I think I make a big error when I model the ceiling, I will try to model it again, and see what happen.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service