AccuRender nXt

advanced rendering for AutoCAD

I am trying to use a specific wood finish from a furniture manufacturer and the studio lighting seems to add a lot of red tint. Do I adjust the lighting or the finish sample?

Views: 1209

Reply to This

Replies to This Discussion

Attach a picture here so we can see what you mean.

I'm assuming you're using the default studio lighting--  perhaps changing the background color or just alpha compositing afterwards.  If either of these assumptions isn't true-- let me know.  It's important, because by default the skylight is neutral-- if you've changed something, however, that may not be true.

 

I'm pretty sure your best bet will be to alter the material textures-- in this case bring them into Photoshop or eq. and turn down the saturation a bit.  Alternatively you could try the Saturation slider in nXt or the Image Editor to see if that will give you what you need.

 

Nice renderings, BTW.

 

 

 

Yes, I have been using the default studio lighting. I will try the saturation slider as I have already tried the Image Editor.
Attachments:
I've discovered that the finish sample changes considerably when using "Auto Balance" within Microsoft Photo Editor. (Turns orange) Where can I get a better selection of wood samples? I've tried scanning and taking a photo of the real deal.

This is an area where other users may be able to help.  We've got a few users doing high quality furniture who may be willing to share.  Creating your own textures is not an easy process.  Even once you've gotten the scan and the color balance right, you still have the problem of producing tileable textures without too much obvious repetition.  This is usually done partly with software and partly with black magic.

 

High quality textures are available for sale from outfits like Arroway.  Our content and entourage page has some starting points-- see the materials stuff and the texture stuff.  Manufacturers often have decent samples as departure points-- it sounds like you may already have some-- I can't quite tell from your post. 

 

Avoid MS's Auto-Balance if you don't like it, BTW.

It's your background causing the problem as I suspect you've got it set to Solid colour.

Change it to Sky where it will use the HDRI and then save the image with an Alpha channel.

I did, finally, get around to trying this.  I left the background as white but turned down the brightness to compensate (-0.35) in this case.  This is necessary because the furniture is being rendered in complete isolation and the tone operator is over-exposing it.  

I did use the Path Tracer for the image below, but you'll get similar results using the original engine.  The Path Tracer does a better job with the lighting inside of the shelving, for example.  It takes quite a bit longer to resolve, though.

Is this more what you had in mind?

Here's what I get with background set to Sky

..and now with your furniture

That is a beautiful thing! Your input has been invaluable. Thank you.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"The settings are very likely fine-- the kinds of things that create noise are indirect daylighting and glossy reflection.  This image has a lot of that.  ArStudio will likely handle this much better-- it's got a built-in denoiser."
3 hours ago
Maciej commented on Maciej's photo
Thumbnail

c3

"Ok, I will.  And maybe any clue about nXt settings? Standard works ok, Hybrid - so, so... I see a lot of comments about Path Tracer, wjich makes me belive PT works pefrectly as well. The point is to find out what's wrong with my…"
3 hours ago
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"Try ArStudio."
7 hours ago
Maciej commented on Maciej's photo
Thumbnail

c3

"BTW - Ant idea how to get rid of this "grain"? More than 500 passes (Path Tracer) and only HDR lighting. Unfortunately to no avail..."
11 hours ago
Maciej commented on Maciej's photo
Thumbnail

g2

"Thank you George."... I always avoid to change material - colour - surface quality on the outer corners, but only on inner ones. " - So do I.  Client's wish.  :)"
11 hours ago
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"Very contemporary feel of space here Maciej! Great job!"
Saturday
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"A note off topic, clearly subjective: I always avoid to change material - colour - surface quality on the outer corners, but only on inner ones."
Saturday
Maciej posted photos
Thursday

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service