AccuRender nXt

advanced rendering for AutoCAD

This is the first preview of the new nXtRender Batch.

You should only try this if you are adventuresome, and willing to make your way through some undocumented stuff. and not get mad at Rich and I if some things are not working properly.

If you want to try this, you can download it from here:


http://www.mediafire.com/file/em8aq6v0535r8j0/nXtRender_AC_Batch_MB...

And just install it.

This is Beta Test Add-on to nXt and AutoCAD at this point. Later it will be integrated into the nXt install. It should work with most recent versions of nXt. And it should work for AutoCAD 2010-2014 (We haven't tested every possible combination yet)

After downloading, you will get a .ZIP file with a message like this:

Click on the message to install it.

New Ribbon

After installation, a new Ribbon should appear in AutoCAD

Racecar

The Race car loads the nXt sidebar menu (the same as typing in nXt).

Help Button

The ? loads an about box:

(The 'Synch Options' button on the bottom will import some settings made while rendering, but not material changes (yet) from the nXtRender Batch Renderer)

Render Button

The green button will extract your current model and save it to the disk for use with the Batch Rendering process.

After Extract, the Batch Renderer will load as a separate process with this dialog:

You can set the render size, number of passes, etc.

And then start rendering.

I will add more documentation here later, but for now you may need to just try some things out.

Views: 3081

Reply to This

Replies to This Discussion

The service pack 2 must be the reason it is not working for me in AutoCad 2012. 

Right. Ribbons only work in 2012 if you have service pack 2 installed.

And the ribbon is what loads our modules, upon executing one of the commands on the ribbon.

No. We're not sure what it means yet. 

We simply wanted to get a preview of features that we might add to get some feedback, like this.

Could you look and see if that file exists in that folder?

The batch render also eats up a lot of system resources too.

Oh, I see it. There is a "\bin_nxt" added to the end of the folder path to the RPS_nXtMaterialEditor.exe file which should not be there.

We'll fix this.

Thanks.

We haven't done anything yet with RPCs, Decals and nXt Plants. 

Will there be any development in these areas, (RPCs, Decals and nxt Plants)?

Also how do transfer the batch rendering to another PC?

Do I always have to load AutoCad then the batch render to get it started?

Yes. We plan to make everything work.

We wanted to get an early version out to see if there was any interest in this first.

Right now, to render on another PC, you would simply:

1. Copy the "batch folder" to the other machine

2. Run the executable "IRenderBatch.exe" on that machine.

3. Browse to the file named "nxt_render_params.txt" in the batch folder

    and click "Open".

    The rendering process will start.

The batch folder: The folder for a model named Drawing1 would be this folder:

C:\Users\Your User Name\AppData\Roaming\nXtRender Batch\Render_Data\Drawing1

You might need to change Folder and Search Options/View for WIndows Explorer to Show hidden files, folder, and drives, to be able see that folder.

"IRenderBatch.exe" is currently located in a folder called: C:\Users\Your User Name\AppData\Roaming\Autodesk\ApplicationPlugins\nXtRender Batch.bundle\Contents\RPS_BIN. So you would want to install nXtRender_AC_Batch on that machine first. If it's a 64 bit machine you would run "IRenderBatch64.exe", to render using 64 bits.

We will probably rename the file IRenderBatch.exe to something like nXtRenderBatch.exe.

We should probably also rename the file "nxt_render_params.txt" to something to make it easier to select.

You would not need to have AutoCAD running anywhere to render once the batch files have been saved. AutoCAD would not have to be installed on that batch rendering machine either.

Will nXT Render Batch run in conjunction with the Farm? I'm currently batching renders with the Farm, so why should I switch? Is the Farm going to be phased out? Or will this batch render take place of the current batch render already inside nXT?

At least for now, nXtRender Batch is an additional option for people who like its convenience, or some if its post-processing. We are still waiting to hear from anyone who finds it useful.

A lot of people are having problems using it with older versions of AutoCAD, and I don't know if anyone has tried any of the new features.

The Render Farm will still be around as another option. And the " in process" renderer for AutoCad will still work.

Al and Rich are using the term "batch" differently than we have in the past.  This is an out-of-process renderer that they've used with success on the SketchUp side.  It extracts a file from AutoCAD and can render it-- even on a machine that doesn't have AutoCAD.  (In this sense, it's similar to the way nXtStudio is designed to work.)  It has nothing to do with our current Farm or Batch features.

When Al and Rich get everything working (it may take a little while), you'll see a product that has some additional features that we don't offer within AutoCAD. 

RSS

Search

Translate

Latest Activity

Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
10 hours ago
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard. http://accurender.ning.com/forum/topics/tasks-in-render-farm-window"
10 hours ago
Peter Milner posted a discussion

RenderFarm passes and tasks

Got a strange glitch here.On one of our PCs, when sending a render to the Farm, the option to change the number of tasks is greyed out and stuck on 10. However, when a job is sent to the farm, it is automatically broken into 25 tasks.The PC is running the latest versions of nXt and the Farm and has been working perfectly up to  now.Any ideas?See More
15 hours ago
Peter Milner commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"You may be right on the bricks. What looks like noise is actually the texture of the fabric."
15 hours ago
George Ioannidis commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Oct 16
Peter Milner posted photos
Oct 15
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service