AccuRender nXt

advanced rendering for AutoCAD

Would it be possible to have a setting for pattern repeats on materials? Many times carpets, wall papers and fabrics have the pattern repeat slid one direction or the other some distance. Most of the time this isn't an issue, however I have just suffered through dealing with a very particular client and making a large enough pattern to take this into account slowed the rendering substantially.

Thanks for your consideration.

Views: 437

Reply to This

Replies to This Discussion

No clue what you mean.  You'll need to provide an example.

Your talking about seamless tiles and repeating tile patterns. nXt handles these well. It is up to the operator (you)  to to use correctly made material maps to achieve a good result.  Google seamless tiles or repeating tiles and you'll get a number of tutorials that will walk you through the process. Here are two examples: http://www.photoshopessentials.com/basics/repeating-patterns/

http://www.myjanee.com/tuts/tilings/tilings.htm

BW

I could not find a good example that is easily seen so I've Tried to do a simple diagram. Hopefully that plus the explanation below is enough.

Many items with patterns do not have a direct pattern match where the pattern simply fits into a square grid. When using a one of these fabrics there is an amount of material that has to be removed in order that the picture continues successfully. This creates something of a brick pattern turned on its side - see the attached diagram.

Attachments:

Since it is a repeating pattern, you can create a square with that pattern in a program like Photoshop, that meets the criteria required to create a seamless tile for material mapping in nXt and every other rendering engine available.

The other option would be to use the tile tool. Create a new 'advanced' material,. Under the 'material tree setting' select "TILE". Set the scale to the size of the image you are useing as a texture map. You'll need to 'unlock' the constraints to enter a dimension which is not square. Set the joint to "0" (zero). Then set the offset to a known dimensional offset or get to it by trial and error.

BW

Almost-- the texture coords. won't respect the offset unless I add that feature.  Maybe (it would be a confusing checkbox that would be seldom used.)

I've actually gotten this method to work for me in the past, that's the only reason I suggested it. But as I try it again, prompted by Roy's "almost..." reply, I see that it is problematic. I'm not sure  I understand why the coords. don't respect the offset. Why would that not be the default.

None the less, a repeating seamless tile can be created from any image to duplicate or represent carpet or wall coverings.

BW



Roy Hirshkowitz said:

Almost-- the texture coords. won't respect the offset unless I add that feature.  Maybe (it would be a confusing checkbox that would be seldom used.)

I'm pretty sure it never worked that way.



akinlolu olugboji said:

akinlolu olugboji, hello, according to your settings, I get the figure gap is misplaced, I did wrong, what?

Attachments:

OK

I think Kingjin has seen exactly what I had tried & also the result that I was getting. When you try and tile a pattern with the tile or the brick tool you get a slight shadow line. For a low-res image its not a big deal but for high-resolution its a problem.

When I add enough pattern to get a full repeat in the typical square format the file size for the image is a lot larger than the original square pattern, many times 16 times as large. This really slows the rendering down.

I don't have any idea of the inner workings of nxt or how complicated what I'm asking for is. IF the tile/brick tool was a little more precise and the joint thickness could successfully be zero it would do the trick. It would also be helpful to be able to align one face on an object while leaving the others as they currently are.

The tile pattern can be set to 0 without joint lines.  It still won't work for your application (like I mentioned above), not until I add a feature that locks the mapping to the tiling-- haven't decided yet and certainly won't do it any time soon.  You can probably reduce the resolution of the compound image somewhat in your case-- depends on the scene.

Kingjin is using the bump feature which can sometimes show some odd results.  He is not using a joint spacing of 0.

RSS

Search

Translate

Latest Activity

Tom Jarvi posted photos
Mar 12
OYEBANJI EMMANUEL posted a photo

Render 1 copy (1)

This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Dec 20, 2023
OYEBANJI EMMANUEL posted a photo

Render 1

This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
Dec 18, 2023
OYEBANJI EMMANUEL posted a photo

00001 copy

An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
Nov 22, 2023
OYEBANJI EMMANUEL posted a discussion

nxt render Course/tutorial

Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
Nov 5, 2023
OYEBANJI EMMANUEL replied to N` Goraw's discussion ACCURENDER NXT FOR WALKTHROUGHS
"Good day Sir, Hope this message meets you well. I just completed a short walkthrough of an office. Its down here https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
Nov 5, 2023
Maciej posted photos
Jun 6, 2023
Marko Stout replied to Peter Milner's discussion Comotion
"Is comotion still om progres? I need to make some moving parts in NXT!!"
Apr 7, 2023

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service