AccuRender nXt

advanced rendering for AutoCAD

hello to all
I'm doing my first render interior, I wanted some advice from you, how to improve the lighting and views.

Hello and thanks for the answers

Views: 1157

Attachments:

Reply to This

Replies to This Discussion

thanks for the info and the website

I saw that the files are in and no autocad 3ds!

as the amount in autocad 2010?
and remain attached to the materials?

Yes there are in *3ds format using the add texture widget in Nxt to import the files. Then right click on the material you wish to change and choose reload and change the material for the desired one.

I tried to enter the 3ds file through the widget nxt;
I also created its materials, but many blacks;

you usually works importing "all" materials?
or you need to replace them with those of nxt??

if I can insert libraries 3ds, I can do a jump is not indifferent to the quality of the render!!

First you import via nxt widget which I believe you have no problem with.

Right click on the material you wish to change and choose reload from the content menu.

roberto sacchetti said:

I tried to enter the 3ds file through the widget nxt;
I also created its materials, but many blacks;

you usually works importing "all" materials?
or you need to replace them with those of nxt??

if I can insert libraries 3ds, I can do a jump is not indifferent to the quality of the render!!

In the browser window select the desired material from your library on your hard disk and click OK this changes the material assign as in this case the side wind screen and head lamps/



akinlolu olugboji said:

First you import via nxt widget which I believe you have no problem with.

Right click on the material you wish to change and choose reload from the content menu.

roberto sacchetti said:

I tried to enter the 3ds file through the widget nxt;
I also created its materials, but many blacks;

you usually works importing "all" materials?
or you need to replace them with those of nxt??

if I can insert libraries 3ds, I can do a jump is not indifferent to the quality of the render!!

The change you can see here, do same for all other materials you wish to change then render. 

akinlolu olugboji said:

In the browser window select the desired material from your library on your hard disk and click OK this changes the material assign as in this case the side wind screen and head lamps/



akinlolu olugboji said:

First you import via nxt widget which I believe you have no problem with.

Right click on the material you wish to change and choose reload from the content menu.

roberto sacchetti said:

I tried to enter the 3ds file through the widget nxt;
I also created its materials, but many blacks;

you usually works importing "all" materials?
or you need to replace them with those of nxt??

if I can insert libraries 3ds, I can do a jump is not indifferent to the quality of the render!!

This you can see from the rendering window.

You can also type, "3dsin" at autocad command prompt and hit entre then browse for the 3ds file and choose inport by material or objects as the case that best suit your purpose.



akinlolu olugboji said:

The change you can see here, do same for all other materials you wish to change then render. 

akinlolu olugboji said:

In the browser window select the desired material from your library on your hard disk and click OK this changes the material assign as in this case the side wind screen and head lamps/



akinlolu olugboji said:

First you import via nxt widget which I believe you have no problem with.

Right click on the material you wish to change and choose reload from the content menu.

roberto sacchetti said:

I tried to enter the 3ds file through the widget nxt;
I also created its materials, but many blacks;

you usually works importing "all" materials?
or you need to replace them with those of nxt??

if I can insert libraries 3ds, I can do a jump is not indifferent to the quality of the render!!

what a pity that you can not import the material from 3ds files!!

would be too good!

dowload hour block, finishing (mirror, plants, various objects) and proceed.

then publish views

It looks like it needs many more passes.

Try using the Path Tracer engine. Although the image is very grainy to start with, you get an accurate sense of the light right from the start.

As Akinlolu said, test your lighting and materials with just the room and maybe the sofas on their own.

Also make sure your interior lights are on a different channel to the daylight so you can tweak the balance later when you save as an nxt image.

roberto sacchetti said:

I may have solved, it was a simple error 3DFACE that had stuck to the light and you could see when I copied!!

now I've done it a try.

what do you think??
you have any advice?

thanks peter, also follow your advice

I think now it's much better. keep in mind that I did make only 15 passed and the resolution is 800x600;

now I'm going to fix the bedroom, the bathroom, etc. .....

Attachments:


Here are some leather materials to start with.
roberto sacchetti said:

I think now it's much better. keep in mind that I did make only 15 passed and the resolution is 800x600;

now I'm going to fix the bedroom, the bathroom, etc. .....

Attachments:

RSS

Search

Translate

Latest Activity

Tom Jarvi posted photos
Mar 12
OYEBANJI EMMANUEL posted a photo

Render 1 copy (1)

This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Dec 20, 2023
OYEBANJI EMMANUEL posted a photo

Render 1

This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
Dec 18, 2023
OYEBANJI EMMANUEL posted a photo

00001 copy

An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
Nov 22, 2023
OYEBANJI EMMANUEL posted a discussion

nxt render Course/tutorial

Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
Nov 5, 2023
OYEBANJI EMMANUEL replied to N` Goraw's discussion ACCURENDER NXT FOR WALKTHROUGHS
"Good day Sir, Hope this message meets you well. I just completed a short walkthrough of an office. Its down here https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
Nov 5, 2023
Maciej posted photos
Jun 6, 2023
Marko Stout replied to Peter Milner's discussion Comotion
"Is comotion still om progres? I need to make some moving parts in NXT!!"
Apr 7, 2023

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service