AccuRender nXt

advanced rendering for AutoCAD

I've just implemented Intel's denoising library in AccuRender Studio. I think the results are very exciting.  Most models seem to be something like 4-10 times faster(!).  I'm pretty darn sure this makes AccuRender Studio faster than the original Standard Engine, with much better results and much less monkeying around (no daylight sources, reflective shaders, etc.)

The Intel Open Image Denoise, unlike nVidia Optix (which I had previously implemented), does not require a specific GPU.  It runs on modern Intel CPUs and seems to be equally fast and perhaps a little better in quality.

You can get it on the Download->AccuRender Studio page.  Please note that I have changed the names of the AutoCAD plugins, so early adopters will have to repeat the netload command step.

*******

A couple of examples, courtesy of Peter Milner's models.  Click on them to see them full size.

I do have a relatively fast 16 core machine, however, this one ran for one minute(!):

This one ran for five minutes-- it's got a ways to go but this level of completion would have been hours and hours before.

More to come.

Views: 1150

Reply to This

Replies to This Discussion

Let the first one run during breakfast.  At 1hour 16 or so:

Without denoising:

Impressive results Roy! Does this feature "wipes" some texture and reflections details? Luxcore and Cycles (and other rendering engines as well) have this feature for some time now, but if used with less (say 200-300) passes it blurs noticeably some details. On the other hand, it speeds up the whole process drastically. nXt seems to be returning to my sphere of interest, I am definitely following the nXt denoising development hereafter. Good job!

It's not perfect, it can blur detail and it does improve with more rendering time.  It also isn't mine, it's Intel's, so many other products will have it.

It is, however, revolutionary.  It makes this type of physically-based rendering much more practical for many applications, including things like CGI movies (Intel used this on the Moana set with very good results.)

Give it a try when you get a few minutes free and let me know what you think.  I'm finishing up the details for saving HDR denoised images-- otherwise the version that's out there is functional.

Does this need a new version of ArFarm to work with it?

Yes, I don't have plans to do denoising for the current product. 

ArStudio does come with a farm.  You would want to install it on each farm node and run the ArFarmNode.exe.  In this case, denoising will happen in the new image editor when you combine the results of the nodes.

I would try it interactively first, and see what you think.  There are instructions on the download page about how to get legacy data (materials, lights, etc.) included.

Great! Roy, does that mean, that to benefit from this feature one should have strictly Nvidia GPU? I reckon AMD GPUs cannot run this technology...

No GPU is required.  AMD CPUs will work fine.  SSE 4.1 is required, but that should be present on all but the oldest machines.

I have a license for AR NXT v. 1.0.349.
I have not used it for many years. Mr. Roy, if nothing prevents you from creating a plugin for the good old AutoCad 2008 (works exclusively on wim. 10 pro 64bt.)

Unfortunately, Acad 2013 is currently as far back as I can reasonably go.  Many factors, including technology, prevent going back further.

The download comes with a Rhino 6 plugin.

AccuRender Studio when run as a standalone can read Sketchup files and some other formats.

Can I run this application with ProgeCAD 2019

http://www.progesoft.com/en/products/progecad-professional/

Not as a plugin, no.

That's too bad.  I'm still sitting on 2012 here.  Rhino is about as old as well.  Neither will be updated anytime soon I figure.

As for the standalone, can it read DWG files?  If so, that would be great.

Also, since more and more firms are running LT due to the costs of a full seat, will it run under that? Assume not since LT doesn't like most programming languages.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"If it's crashing consistently with a particular drawing, let me know, there may be a problem.  Please don't use all caps when composing forum messages."
Jul 30
norton torres posted a discussion

I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010

 I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.See More
Jul 28
Rich Hart posted a discussion

Grass Options for nXtRender

A user asked about the different ways to add grass to a model. Below are sample renderings showing 3 different approaches, along with links to download the groundcover and material files used.1. Textured Material - Use a material with a grass texture image.This model was rendered by simply using the textured nXt material call Grass-Rye_Dark.ArMaterial.This material is included with the standard nXt Material Libraries that can be downloaded here:…See More
Jun 22

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service