AccuRender nXt

advanced rendering for AutoCAD

If I start a new drawing in AutoCAD 2018, load nXt and then press the Walkabout button, AutoCAD crashes instantly.

However, this doesn't happen if I start with a template, or open an old drawing originally created in AutoCAD 2011.

Views: 30

Reply to This

Replies to This Discussion

I've narrowed the problem down.

It has nothing to do with AutoCAD 2011. The problem is the initial plan view when starting a blank new drawing.

If I rotate the AutoCAD view before pressing the Walkabout button, then everything works fine.

After that there is no problem reverting back to plan view.

I can duplicate this.

I can also duplicate it in AutoCAD 2015, 2016 and 2017.

I'll see if I there is a way to we can detect and fix this.

Thanks.

RSS

Search

Translate

Latest Activity

alex dounis replied to alex dounis's discussion Render settings to show corner of walls or wall edge Please !!!
"Thanks Peter , Ill give it a go. Cheers Alex"
yesterday
Dizzy Gosnell replied to Dizzy Gosnell's discussion nXt and AutoCad 2019
"Hey Rich, Fantastic stuff, right on the money, worked like a charm. Thanks so much. Diz"
Thursday
Rich Hart replied to Dizzy Gosnell's discussion nXt and AutoCad 2019
"Download and install the latest version from: nXtRender Downloads Page Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time…"
Thursday
Dizzy Gosnell posted a discussion

nXt and AutoCad 2019

Are there new .ARX files etc needed to get nXt rendering running inside Acad 2019 I've tried loading the files that worked for Acad 2016 but when I type 'nxt' on the Acad command line it says not recognized.Many thanksDizSee More
Thursday
Peter Milner replied to Peter Milner's discussion Animation on Farm
"Thanks Roy. I'll base the number of frames on multiples of 80 then."
Wednesday
Roy Hirshkowitz replied to Peter Milner's discussion Animation on Farm
"Looks like it's hardcoded to 20 frames / task."
Wednesday
Peter Milner replied to Peter Milner's discussion Animation on Farm
"Is there any way of finding out how many frames in a packet, so that I can optimize the number of frames between 4 nodes?"
Wednesday
Peter Milner replied to Peter Milner's discussion Texture orientation
"No rush. I'm only experimenting with ArStudio at this stage. "
Wednesday

© 2018   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service