AccuRender nXt

advanced rendering for AutoCAD

This is the second time this has happened.  I will be working on a model then when I type NXT I get this AutoCad crash "FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at de241c2h". I have tried purging and running audit but to no avail. If I try opening the drawing with an NXT running the drawing will crash prior to opening.  I am attaching the drawing

Thank you!

Views: 364

Attachments:

Reply to This

Replies to This Discussion

Somehow the material called AccuRender-Glass got hosed.  It's unassigned, so you can easily purge it.  (The material called AccuRender-Glass-01 is fine.)  Purge it before you load nXt-- then load nXt.  You should be good to go.  If you can't figure it out I can send you a corrected version of your drawing.  Let me know.

This sort of thing normally occurs when you switch file versions without nXt loaded.  There may be some other ways to make it happen-- such as loading a version of a block with nXt data when nXt is not present.

That worked... thank you!!!

Quick Question.... if the material had been assigned to an object. How would know what one it is?

Roy Hirshkowitz said:

Somehow the material called AccuRender-Glass got hosed.  It's unassigned, so you can easily purge it.  (The material called AccuRender-Glass-01 is fine.)  Purge it before you load nXt-- then load nXt.  You should be good to go.  If you can't figure it out I can send you a corrected version of your drawing.  Let me know.

This sort of thing normally occurs when you switch file versions without nXt loaded.  There may be some other ways to make it happen-- such as loading a version of a block with nXt data when nXt is not present.

Select object -> look in the Properties panel (Ctrl+1), there is a material assignment line somewhere.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service