AccuRender nXt

advanced rendering for AutoCAD

This is the second time this has happened.  I will be working on a model then when I type NXT I get this AutoCad crash "FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at de241c2h". I have tried purging and running audit but to no avail. If I try opening the drawing with an NXT running the drawing will crash prior to opening.  I am attaching the drawing

Thank you!

Views: 379

Attachments:

Reply to This

Replies to This Discussion

Somehow the material called AccuRender-Glass got hosed.  It's unassigned, so you can easily purge it.  (The material called AccuRender-Glass-01 is fine.)  Purge it before you load nXt-- then load nXt.  You should be good to go.  If you can't figure it out I can send you a corrected version of your drawing.  Let me know.

This sort of thing normally occurs when you switch file versions without nXt loaded.  There may be some other ways to make it happen-- such as loading a version of a block with nXt data when nXt is not present.

That worked... thank you!!!

Quick Question.... if the material had been assigned to an object. How would know what one it is?

Roy Hirshkowitz said:

Somehow the material called AccuRender-Glass got hosed.  It's unassigned, so you can easily purge it.  (The material called AccuRender-Glass-01 is fine.)  Purge it before you load nXt-- then load nXt.  You should be good to go.  If you can't figure it out I can send you a corrected version of your drawing.  Let me know.

This sort of thing normally occurs when you switch file versions without nXt loaded.  There may be some other ways to make it happen-- such as loading a version of a block with nXt data when nXt is not present.

Select object -> look in the Properties panel (Ctrl+1), there is a material assignment line somewhere.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"If it's crashing consistently with a particular drawing, let me know, there may be a problem.  Please don't use all caps when composing forum messages."
Jul 30
norton torres posted a discussion

I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010

 I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.See More
Jul 28
Rich Hart posted a discussion

Grass Options for nXtRender

A user asked about the different ways to add grass to a model. Below are sample renderings showing 3 different approaches, along with links to download the groundcover and material files used.1. Textured Material - Use a material with a grass texture image.This model was rendered by simply using the textured nXt material call Grass-Rye_Dark.ArMaterial.This material is included with the standard nXt Material Libraries that can be downloaded here:…See More
Jun 22

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service