fireflies

[akinlolu olugboji]

Why the fireflies.

Interior lighting scheme

30 lights 25W all spootlights

packet tracer 20 passes

[George Ioannidis]

As soon as I'll be free from some peculiar cases which have arise lately (as a result of government's offices serious mistakes and ommisions) I'll give it a try. Not sure about the result though... :D

P.S.

"Gitche Manitou" is the "Great Spirit" of Native North American nations and tribes. Don't you remember Karl May's books about Winnetou and Old Shatterhand? Ah, I forgot, you are too young for that my friend :D As for the goats and lambs... well... visit my country the Easter time just to have a small taste of all this... ;)

[akinlolu olugboji]

I use autocad only unless the plans when it came to me came from somewhere else but I do not believe so as autocad would have reported so when opening the drawing.

[Roy Hirshkowitz]

This is something else-- it's possible the original drawing had legacy (ar3/4) data in it and that caused some of the units confusion.  The procedure I used to "fix" it actually set the INSUNITS to something wrong then back to the right value.

[akinlolu olugboji]

It should but the legacy data have long being converted (as I do not have AR3/4 on my systems anymore)

[Roy Hirshkowitz]

It's still likely the source of the error.  The ar3 scale and the INSUNITS were probably never synched up.

[akinlolu olugboji]

After the unit fix.

[akinlolu olugboji]

The legacy materials are indeed the culpit here as I see it in another drawing, only chaging to 5 and back to 4 of the insunits, also corrected the material defination (even those with maps) without my having to reset the scale of the maps one by one, they all adjusted correctly by themselves.

[akinlolu olugboji]

I must add to after changing the insunits value to 5 and back to 4. You double click on a materail(with maps) in the material tab to open the ME and close it back immediately in AutoCAd viewport you should notices the material scaling correctly without even having to regenerate the viewports.

[Jan Verzelen]

looks great now. You did a fine job with the floor also. Just curious, when you put the glossy switch off, do you still have problems with the fireflies?

[Alejandro Testa]

Hi Akin,  only one thing, I think in IMHO that you can move the lights that are in front of the columns. Too much reflection on them.

[akinlolu olugboji]

You are right about that, missed it. Thanks.

 

[Kevin Lockwood]

shouldn't the tile material change align with gout line? Seems like your material mask has shifted to the left. Those would be a ton of odd tile cuts.