AccuRender nXt

advanced rendering for AutoCAD

Any idea why the frosted glass panels running parallel to the windows are so flat and white, whereas those running perpendicular to the windows look correct?

The panels are drawn as a solid block 6mm thick and I've attached the material settings.

I used the Path Tracer engine for this and am currently running a Hybrid render to see if it makes any difference.

Views: 286

Reply to This

Replies to This Discussion

Okay. I've run the same render using the Hybrid engine and while  there is an improvement, there are still some odd things happening (circled in red).

Send the model by email when you get a chance-- if nothing else I can at least check for a problem with the model and make sure the new stuff doesn't have the issues.  If it's a bug in the current stuff I'm not sure there's a whole lot I can do.

Hi Roy.

I've sent you the model by WeTransfer.

Haven't had much chance to look at this during the weekend-- however-- I did run the simulation with the new stuff.  This is what I got (with and without the ceiling lights):

Some notes--

1. I'm guessing a lot of the problem comes from the "Thin" switch and the IOR.  I did use an IOR of 1.5 and got rid of the Thin switch for the acrylic material.  (In the new product the Thin switch is on the material.)  The use of these settings is likely causing weird refraction-- the brighter panels-- the ones which refract the daylight-- should be the ones closer to the window.  The Path Tracer has a second problem, the use of automatic daylight sources, which is very likely causing some inaccuracies.  The Hybrid engine looks like it's doing a more credible job-- but the refraction error is causing the back panels to strike the windows rather than the front ones.

2. This simulation ran forever, but notice how noisy the daylight image still remains.  This is due to the large size of the space (ceiling height too) and the fact that it's lit from only  one side.  The reflected light in the foreground is taking a long time to resolve.  Not something you necessarily need to worry about-- this is more for me-- but very interesting.

3.  The reflected caustics you see on the back wall using the new product are real-- sunlight off of the chair legs, I believe-- but may be a nuisance and undesirable.  Not sure what to do about this.

I'll look into this a little more using the old product-- see if I can learn anything else.

Looks like the Thin switch isn't being used?  Ignore that part:

I substituted Sandpaper bump (strength = 0.2) for roughness in the acrylic material.  These are using the hybrid engine:

Thanks for looking into this Roy,

I'll do a few tests of my own.

I've been experimenting with nVidia's denoiser (requires one of their GPUs) in the new Image Editor.  Very promising-- here's regular and denoised.  Click on each image to see it full size:

Nice! Many path renderers are introducing denoising features with good results.
I have a question on those images Roy: the bright elliptical spots on the wall between the two windows are reflection caustics from highly reflective surface on the chairs? Looking really bright, but I kinda like it. Those spots are not on Peter's images though.

Most are using nVidia's stuff for denoising-- it's pretty impressive.

They are reflective caustics which you get automatically in the new engine-- yes, I think they come from sunlight striking the chair bases.  They should be pretty accurate but some might consider them a nuisance.  Not sure what to do about this yet.

Thank you Roy. The more physically based effects nXt has, the more realistic pictures it will compute. All of those need a lot of computing power under (or on top of) our desks though. Are you doing any move to engage GPUs on rendering process in nXt? Most of commercial or non-commercial renderers looks like they are moving that direction (Real Time - RT technology, GPU rendering etc.) Rendering times are abyssally shorter on even mid range cards like 1060 or 1070 (for a few hundreds of €) compared to very expensive CPUs with many cores (and costing thousands of € or $).

Not yet.  It's not quite like that-- where you can offload certain portions.  It's more like an all or nothing proposition.

RSS

Search

Translate

Latest Activity

Peter Milner posted a discussion

AR Studio ground plane

The ground plane in Accurender Studio appears as a rectangular surface under the object rather than extending to the horizon.See More
Thursday
Tibor K. Karsai posted photos
Wednesday
Rich Hart replied to Paul Jackson's discussion Old versions of nXt for AutoCAD
"There is a bug in the logic to find the version with the closest date to your license number that occasionally finds the farm install instead. You should be able to simply download the install the NK21 or the OA30 version from the link I posted…"
Tuesday
Paul Jackson replied to Paul Jackson's discussion Old versions of nXt for AutoCAD
"Thanks Rich. I also popped-in my license code to the checker, it came up with nXtFarm64_0355.exe Seems to be the render farm though?"
Tuesday
Rich Hart replied to Paul Jackson's discussion Old versions of nXt for AutoCAD
"This page: http://www.renderplus.com/php/get_all_downloads.php#nXtRender lists all of the versions of nXt for AutoCAD currently available for download. The version from Nov 2014, NK21, will work with your license bought in 2013."
Tuesday
Paul Jackson posted a discussion

Old versions of nXt for AutoCAD

Is it still possible to download old versions (bought in 2013), of nXt for AutoCAD? Got a new PC, but cannot find my installation file. Thanks.See More
Tuesday
Roy Hirshkowitz replied to Peter Milner's discussion Reflected background brightness
"Almost certainly.  A fix may be difficult at this point.  The code has not been touched in years."
Aug 21
Peter Milner posted a discussion

Reflected background brightness

In Accurender I can turn up the brightness of the reflected background, but when I send the same render to the farm, it renders as the default brightness.Possibly an oversight or a bug?See More
Aug 21

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service