AccuRender nXt

advanced rendering for AutoCAD

I got an email from an old AR3/AR4 user who is considering the new nXt Engine

Go ahead and give him honest answers.
 
My questions:
  • Is nXt still a thriving product with an active user base for online forum support as I figure things out again?
  • Do old AR3 or 4 materials and plants still work (or can they be converted?)
  • Is the latest version of nXt compatible with ACAD 2016 & Windows 10? (I only see reference to 2015 on the site)
  • How bad would the learning curve be for us old-timer users of AR3?
  • Would I upgrade from my old nXt license for $240?
I am on the fence between trying to learn nXt and just going with AutoCAD’s on board renderer (which must have gotten better?)
---
I can answer a couple:
- The latest versions are compatible with ACAD 2016 & Windows 10 
- Any old AccuRender user can get started for the $240.00 price

Views: 394

Reply to This

Replies to This Discussion

The forum here is excellent. There are many people who would be happy to give you a helping hand.

AR3/AR4 materials do work to a certain extent, but there are a lot of new features in the material creation process and I would recommend creating a new nXt material library as you go along.

The learning curve is quite small as nXt is easier and more forgiving than AR3/AR4. You don't need to be so careful with modelling (joining edges perfectly) and there is no more "moulding and trim" to worry about.

Lighting is also more simple as you don't have to place daylight sources. You can either use the automatic setting or simply pick the window glass as a daylight source. You can also select objects to be light sources.

Finally, the quality is far superior to the old AR. The level of realism is vastly improved (see below).

Hi Peter,

Thanks for the reply.  I tried to reply earlier but wasn't a member yet so had to go through the vetting process.  Anyhow, it sounds like the improvements have actually been improvements and the bad old days of light leaking through any edges that didn't touch perfectly are gone!

I think I will give it a go.  In the mean time, one more quick question raised by your beautiful renderings above:  are solids (particularly curved ones) handled fairly well now, or is it still best practice to build everything with meshes to control the number of faces?

Thanks!

I model everything in solids as it makes things easier to edit. As there is no radiosity involved, I don't know if it makes any difference how you model things. That's really one for Roy to answer.

Use whatever's easier.  Solids plus some reasonable settings for facetres usually works just fine.

Just to clarify:

The top image is AR4 from 2007 and the bottom image is nXt last week.

Based on the advice below I have more or less decided to take the plunge and downloaded a trial to test with an actual billable project.  We just did our first test rendering on Friday.  A few initial comments:

  • nXt is great!
  • Material handling (files as opposed to libraries) is SO much better!  HUGE improvement!
  • Layer schemes are great.
  • Ability to adjust lighting by zone after rendering is worth the cost of upgrade by itself.
  • Hard to compare speed. So much time has passed and technology has improved so I expect speed
  • Materials would not translate on one machine but we tried on another and it worked fine.
  • Procedural materials seem different?  We had some very complex concretes with spots at different scales and mapped scratches and bump maps so there was a lot of activity but no repeat for even large rooms and they didn't seem to translate properly.  Haven't had time to look into it.
  • No light leaks!  Hooray!
  • Old "ambient lighting" was handy for quick interior renderings.  We tried "studio" with poor results. Ended up creating 100-foot long 6' diameter invisible light.  Am I missing a quick way to see an interior model before adding lights?

Overall impression very positive.  Have a few questions which I will put in another thread.

I always use a combination of daylight and interior lighting. Initially I set up the basic model with daylight sources only and test it before adding the interior lights. I then add the interior lights and test again before finally adding the furniture.

Thanks Peter.  I always used a similar approach but did the first pass with just the ambient light which rendered super fast.  Our current model has about 20 windows which I assume would behave like 20 individual lights thus slowing rendering time.  Also, they produced tremendous glare which made the materials difficult to evaluate.  I was just looking for a quick and dirty solution while getting the materials assigned, mapped, and tweaked.

I don't think the windows work quite like that. In fact, the more direct light you have, the quicker the rendering resolves.

Create a 600 x 600mm rectangle, turn it into a region and tag it as an area light with 200W.

Place it a couple of mm lower than the ceiling and then copy it around.

These types of light resolve quite quickly.

Also, use the path tracer engine as it immediately shows you the lighting and materials after only a few passes.

Thanks Peter.  Good hints!  I have to get used to a new way of thinking with nXt.  Haven't even tried the path tracer yet.  So much to try, so little time!

RSS

Search

Translate

Latest Activity

N` Goraw posted a photo
Oct 11
Roy Hirshkowitz replied to Douglas Thompson's discussion Accurender 3 + Acad ADT3 + Windows 10
"I really have no idea.  This software hasn't been supported for more than a decade.  Anything you can get to work will be fine from a licensing perspective, I just don't have much to offer you."
Oct 5
Douglas Thompson posted a discussion

Accurender 3 + Acad ADT3 + Windows 10

Wonder if anyone can help. At home I run Windows 7, at work I have Windows 10.At home I use Accurender 3 with Acad ADT3, installed by loading my old Accurender 3 disk, the  downloading the latest *arx file, which I see on my home computer is Accuren3_2000.Can I still download the Accuren3_2000 update from anywhere, and will it work with the office set up anyway? I have tried simply copying the Accuren3_2000.arx from home to work into the Accurender folder in the usual location, but when trying…See More
Sep 29
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service