"thank you a lot for this"
advanced rendering for AutoCAD
Interior daylighting
First shot at interior daylighting since AR3, 60 passes and still going, will those dining chairs ever resolve? Being at it for two hours now. Latest build, default light settings except for the colour tone down to 0.5.
Any pointers at this stage is highly welcomed.
Views: 678
Replies to This Discussion
-
Permalink Reply by akinlolu olugboji on
-
The architrave round the edge of the ceiling doesn't fit properly. I ran into that while try to extrude the lower en of it insteade of extruding again. Also the curtains top are hidden behind the cornice.
The skirting round the edge of the floor is partially enclosed in the wall and has the same material as the floor. Here we most use the same material as the floor for skirting (mostly cutting the floor tiles into strips.)
The glass in the double doors isn't tagged as a daylight source. Must have forgotten to do that.
I'm not sure why there are odd reflections round the edges of the floor. I'll see If I can track it down. What of the light leaking in from the side of the wall beside the door?
The is wonderful how many passes so far?
-
Permalink Reply by Peter Milner on
-
The light near the door is just the sun light coming through the glass and hitting the wall.
This was 150 passes.
-
-
-
Is this path tracer or packet tracer.
-
-
Packet tracer.
-
-
-
68 passes and still going. Not sure am getting the curtail right. shader default with sharpness 0.11. transparency inensity 0.33, IOR 1.0, Burriness 0.89 with glow 0.2. No texture no bump.
-
-
I believe am getting there. Attached to is autocad file, while we await Peters'. 6 passes and going good.
-
-
-
I believe am getting there. Attached to is autocad file, while we await Peters'. 6 passes and going good.
- Attachments:
-
-
breakdown.zip, 2.1 MB
-
-
-
-
One immediate thing I notice with the model is that your viewpoint is from outside the building looking in through the window. I used the clipping plane, I want to get as much view of the room as possible.
-
-
Check your refractive bounces-- you may not be getting all the way out the window. So far at default for interior day lighting. What do you suggest?
-
Permalink Reply by Roy Hirshkowitz on
-
Refractive bounces is normally set to 8-- which is usually plenty. It doesn't change with the preset so if you alter it, it won't go back. It's clearly not an issue anymore since I can now see the windows behind the curtain.
-
Permalink Reply by Kyprianos Arnaoutoglou on
-
I agree with George, very nice tips!
-
Permalink Reply by Alejandro Testa on
-
Peter, thanks this tips are great. maybe yon can share the drawing file when finished. Of course if Akin and you agree about sharing this info.
- ‹ Previous
- 1
- 2
- 3
- 4
- Next ›
Search
Translate
Latest Activity
Render 1 copy (1)
This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Render 1
This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
00001 copy
An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
nxt render Course/tutorial
Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
"Good day Sir,
Hope this message meets you well.
I just completed a short walkthrough of an office.
Its down here
https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
© 2024 Header image courtesy Peter Milner
Powered by
