AccuRender nXt

advanced rendering for AutoCAD

I've just implemented Intel's denoising library in AccuRender Studio. I think the results are very exciting.  Most models seem to be something like 4-10 times faster(!).  I'm pretty darn sure this makes AccuRender Studio faster than the original Standard Engine, with much better results and much less monkeying around (no daylight sources, reflective shaders, etc.)

The Intel Open Image Denoise, unlike nVidia Optix (which I had previously implemented), does not require a specific GPU.  It runs on modern Intel CPUs and seems to be equally fast and perhaps a little better in quality.

You can get it on the Download->AccuRender Studio page.  Please note that I have changed the names of the AutoCAD plugins, so early adopters will have to repeat the netload command step.

*******

A couple of examples, courtesy of Peter Milner's models.  Click on them to see them full size.

I do have a relatively fast 16 core machine, however, this one ran for one minute(!):

This one ran for five minutes-- it's got a ways to go but this level of completion would have been hours and hours before.

More to come.

Views: 713

Reply to This

Replies to This Discussion

That's the one. Thanks.

Why is it not honouring ArMaterials for me? I have attached three images:

1. Realistic view in AutoCAD 2018

2. NXT render of the same (standard mode, ran for about 1:22)

3. ArStudio render of the same (ran for about 1:50)

As you can see the ArStudio render is in monochrome. Am I doing something wrong?

A

Attachments:

Not sure-- can you send a sample drawing?  If so, you can send a link or an attachment privately to roy@mcneel.com.

I've attached the drawing file to this message.

Attachments:

Thanks-- I took a quick look.  This drawing actually only has one AccuRender material called "Silver".  The rest are AutoCAD materials only.  Currently I'm ignoring AutoCAD texture mapping in ArStudio. 

I can probably change this behavior and at least make it work as well as nXt does.  I'll look into it later today.

I changed the software to better handle native AutoCAD materials including some texture mapping. 

To try it out-- in the Start Menu under AccuRender Studio Extras there's an app called Update Manager.  Open it and install build 0141. 

If you've already saved the drawing with ArStudio data you can remove it using the ARREMOVEDATA command so it will redo any material conversions.  Let me know.

Ok will do this tomorrow.

Hi Roy,

I've done a reboot and it has made no difference to the Open Material problem.

I'm running AutoCAD Mechanical 2019 on a Windows 7 machine.

Gotta be the Windows 7 thing.  I'm out most of today-- I'll do some research this weekend.

When you get a chance-- in the Start Menu under AccuRender Studio Extras there's an app called Update Manager.  Try updating to build 0140 and let me know if it fixes the problem.

That seems to have done the job.

Thanks.

Great.  Just FYI it's not a perfect solution.  Because I can't set the initial folder on your system, the Open File box may put you in a weird place.  The libraries will be located in Documents->AccuRender Libraries.  For now there isn't a lot (may nothing) in those folders, although if you do grab something from the cloud it will end up there.

RSS

Search

Translate

Latest Activity

Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin It's work with your .PNG file. Did you just SAVEAS a .JPG to a .PNG with a image editor ? Capture.PNG Render.png"
Dec 24, 2019
mike makki replied to Daniel Hargreaves's discussion Accustudio
"I can help daniel"
Dec 24, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I'm not sure if you are applying the tree to the region as a decal or as part of a material. if a decal onto the region, I don't think AR will allow 2 decals. I guess you could stack them but I don't think one applies to the other…"
Dec 23, 2019
Paul Cloutier posted a discussion

Material help !

Hello...Need help for settings alpha for this tree bitmap.AutoCAD 2018.Thanks !See More
Dec 23, 2019
Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service