AccuRender nXt

advanced rendering for AutoCAD

I've just implemented Intel's denoising library in AccuRender Studio. I think the results are very exciting.  Most models seem to be something like 4-10 times faster(!).  I'm pretty darn sure this makes AccuRender Studio faster than the original Standard Engine, with much better results and much less monkeying around (no daylight sources, reflective shaders, etc.)

The Intel Open Image Denoise, unlike nVidia Optix (which I had previously implemented), does not require a specific GPU.  It runs on modern Intel CPUs and seems to be equally fast and perhaps a little better in quality.

You can get it on the Download->AccuRender Studio page.  Please note that I have changed the names of the AutoCAD plugins, so early adopters will have to repeat the netload command step.

*******

A couple of examples, courtesy of Peter Milner's models.  Click on them to see them full size.

I do have a relatively fast 16 core machine, however, this one ran for one minute(!):

This one ran for five minutes-- it's got a ways to go but this level of completion would have been hours and hours before.

More to come.

Views: 816

Reply to This

Replies to This Discussion

That's the one. Thanks.

Why is it not honouring ArMaterials for me? I have attached three images:

1. Realistic view in AutoCAD 2018

2. NXT render of the same (standard mode, ran for about 1:22)

3. ArStudio render of the same (ran for about 1:50)

As you can see the ArStudio render is in monochrome. Am I doing something wrong?

A

Attachments:

Not sure-- can you send a sample drawing?  If so, you can send a link or an attachment privately to roy@mcneel.com.

I've attached the drawing file to this message.

Attachments:

Thanks-- I took a quick look.  This drawing actually only has one AccuRender material called "Silver".  The rest are AutoCAD materials only.  Currently I'm ignoring AutoCAD texture mapping in ArStudio. 

I can probably change this behavior and at least make it work as well as nXt does.  I'll look into it later today.

I changed the software to better handle native AutoCAD materials including some texture mapping. 

To try it out-- in the Start Menu under AccuRender Studio Extras there's an app called Update Manager.  Open it and install build 0141. 

If you've already saved the drawing with ArStudio data you can remove it using the ARREMOVEDATA command so it will redo any material conversions.  Let me know.

Ok will do this tomorrow.

Hi Roy,

I've done a reboot and it has made no difference to the Open Material problem.

I'm running AutoCAD Mechanical 2019 on a Windows 7 machine.

Gotta be the Windows 7 thing.  I'm out most of today-- I'll do some research this weekend.

When you get a chance-- in the Start Menu under AccuRender Studio Extras there's an app called Update Manager.  Try updating to build 0140 and let me know if it fixes the problem.

That seems to have done the job.

Thanks.

Great.  Just FYI it's not a perfect solution.  Because I can't set the initial folder on your system, the Open File box may put you in a weird place.  The libraries will be located in Documents->AccuRender Libraries.  For now there isn't a lot (may nothing) in those folders, although if you do grab something from the cloud it will end up there.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service