AccuRender nXt

advanced rendering for AutoCAD

How do you make a Visible Light Path?

For example, I would like to render a projector shooting an image onto a screen.

How do I show a visible beam of light from the projector to the screen?

Views: 404

Reply to This

Replies to This Discussion

My original reply only applied to nXt for SketchUp.

You can read it here:

http://forum.irendernxt.com/forum/topics/visible-light-paths

I am using Accurender NXT for Autocad version:1.0.329

Where is the "Lighting Wizard" tab?

Oops - Sorry - I didn't ready your original post properly. That beam wizard only works with SketchUp.

But the rendering properties will work in AutoCAD. You have to create your own geometry and material settings.

We are creating concentric cones with a translucent material, and adding bump maps to them for effect. The cones are all near the edge of the light beam from the spot light.

We create multiple cones - very close to the same size

Ant set the spot light beam and field angle to shine only inside of the cones.

Another way to do this is with volumetric fog:

http://wiki.mcneel.com/accurender/nxt/documentation/beyond/volumetr...

On a small scale using Path Tracer and Fog

This is one I did 3 years ago when fog was first introduced.

Peter, that's exactly what I've tried to achieve. Perfect stained glass window.

Wouldn't you mind to share your  know-how about this effect?

The stained glass window was modeled as a region and tagged as "Thin". The decal was applied with the following settings (the masking was to exclude the black from the transparency so that it would cast shadows:

Here are the fog settings:

I'll see if I can strip the model down to a size where I can upload it.

Having said that, I'm just re-running the render again and it doesn't seem to exhibit the same light beams. The original was rendered in January 2012 and I seem to remember some setting to do with particle size and density.

Path tracer, right?  This is still on the todo list for the Hybrid.  Turn the fog way up (Scattering) to make sure it's still working.

Yes it's still working. I just turned the scattering up to 0.1 and the result is very similar to the original.

Here it is after 2000 passes.

Se eu quiser usar Spot, jogando de baixo para cima, como faço?

Não achei configurações para fazer o Spot lançar luzes estreitas e longas através do nevoeiro!

RSS

Search

Translate

Latest Activity

Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
10 hours ago
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard. http://accurender.ning.com/forum/topics/tasks-in-render-farm-window"
10 hours ago
Peter Milner posted a discussion

RenderFarm passes and tasks

Got a strange glitch here.On one of our PCs, when sending a render to the Farm, the option to change the number of tasks is greyed out and stuck on 10. However, when a job is sent to the farm, it is automatically broken into 25 tasks.The PC is running the latest versions of nXt and the Farm and has been working perfectly up to  now.Any ideas?See More
16 hours ago
Peter Milner commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"You may be right on the bricks. What looks like noise is actually the texture of the fabric."
16 hours ago
George Ioannidis commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Oct 16
Peter Milner posted photos
Oct 15
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service