AccuRender nXt

advanced rendering for AutoCAD

I've just implemented Intel's denoising library in AccuRender Studio. I think the results are very exciting.  Most models seem to be something like 4-10 times faster(!).  I'm pretty darn sure this makes AccuRender Studio faster than the original Standard Engine, with much better results and much less monkeying around (no daylight sources, reflective shaders, etc.)

The Intel Open Image Denoise, unlike nVidia Optix (which I had previously implemented), does not require a specific GPU.  It runs on modern Intel CPUs and seems to be equally fast and perhaps a little better in quality.

You can get it on the Download->AccuRender Studio page.  Please note that I have changed the names of the AutoCAD plugins, so early adopters will have to repeat the netload command step.

*******

A couple of examples, courtesy of Peter Milner's models.  Click on them to see them full size.

I do have a relatively fast 16 core machine, however, this one ran for one minute(!):

This one ran for five minutes-- it's got a ways to go but this level of completion would have been hours and hours before.

More to come.

Views: 734

Reply to This

Replies to This Discussion

That's the one. Thanks.

Why is it not honouring ArMaterials for me? I have attached three images:

1. Realistic view in AutoCAD 2018

2. NXT render of the same (standard mode, ran for about 1:22)

3. ArStudio render of the same (ran for about 1:50)

As you can see the ArStudio render is in monochrome. Am I doing something wrong?

A

Attachments:

Not sure-- can you send a sample drawing?  If so, you can send a link or an attachment privately to roy@mcneel.com.

I've attached the drawing file to this message.

Attachments:

Thanks-- I took a quick look.  This drawing actually only has one AccuRender material called "Silver".  The rest are AutoCAD materials only.  Currently I'm ignoring AutoCAD texture mapping in ArStudio. 

I can probably change this behavior and at least make it work as well as nXt does.  I'll look into it later today.

I changed the software to better handle native AutoCAD materials including some texture mapping. 

To try it out-- in the Start Menu under AccuRender Studio Extras there's an app called Update Manager.  Open it and install build 0141. 

If you've already saved the drawing with ArStudio data you can remove it using the ARREMOVEDATA command so it will redo any material conversions.  Let me know.

Ok will do this tomorrow.

Hi Roy,

I've done a reboot and it has made no difference to the Open Material problem.

I'm running AutoCAD Mechanical 2019 on a Windows 7 machine.

Gotta be the Windows 7 thing.  I'm out most of today-- I'll do some research this weekend.

When you get a chance-- in the Start Menu under AccuRender Studio Extras there's an app called Update Manager.  Try updating to build 0140 and let me know if it fixes the problem.

That seems to have done the job.

Thanks.

Great.  Just FYI it's not a perfect solution.  Because I can't set the initial folder on your system, the Open File box may put you in a weird place.  The libraries will be located in Documents->AccuRender Libraries.  For now there isn't a lot (may nothing) in those folders, although if you do grab something from the cloud it will end up there.

RSS

Search

Translate

Latest Activity

Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
2 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: https://renderplus.com/wp2/uploads/ Thanks, Rich"
20 hours ago
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
22 hours ago
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21
Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service